Mercedes Benz Steering Gearbox Repairs
    • TX:
    • Vector1
    • Vector
    • GA:
    • Vector1
    • Vector
  • Mercedes Benz Steering Gearbox Repairs

    Posted on August 17, 2018 by europeanseradmin

    The Mercedes Benz is an exquisite car. It is the representation of class and sophistication in the automobile world. From their world-class engines to the superior construction of the vehicle, every Mercedes Benz owner is a proud one. Nevertheless, things could go wrong with your Benz and the driving experience may not be as smooth as what you are used to. One of such things that could go wrong and upset its capacity is the Mercedes Benz steering gearbox.

    What is a Mercedes Benz Steering Gearbox and How Does One Work?

    The steering gearbox is a part of the steering system responsible for causing the wheels of a vehicle to turn and by extension, the car. The steering column connects the steering wheel to the steering gear. When the driver turns the steering wheel, the action turns the gear which in turn causes the pitman arm to turn as well. The turning of the pitman arm prompts a series of actions among the steering components which ends with the turning of the wheels. As such, a faulty steering gearbox could mean a rough and unpleasant drive for your Mercedes Benz.

    What Are The Signs Of A Malfunctioning Mercedes Benz Steering Gearbox?

    As a function of the responsibility of the steering gearbox, the most apparent sign of a malfunctioning gearbox is difficulty turning the wheels. As soon as the vehicle is in motion, the mechanical faults become apparent. There is also likely to be oil leakage in cases of a faulty gearbox. The mobility of the car will depend on the quantity of the leak. While small leaks may not cause a lot of damage, a considerable pool caused by an oil leak may require a tow truck to move your Benz. Also, the driver may notice a certain degree of looseness when turning the wheel. Depending on the extent of the damage, especially where the mounting bolt is loose, the steering gear could be moving back and forth to produce clanking noises when the car is in motion. Beyond the noise, this movement could cause wear marks in the mounting area if your Mercedes doesn’t get the repair services it requires on time.

    Possible Causes of a Malfunctioning Steering Gearbox

    As with any other mechanical component of a vehicle, the gearbox will eventually fail from normal wear and tear. Also, low-fluid levels or contaminants in the power steering fluid could shorten the lifespan of the gearbox.

    How is a Steering Gearbox Repaired?

    If you suspect a faulty steering gearbox as the reason behind a malfunction in your vehicle then it is due for repairs. You can bring in your Mercedes Benz for repairs at any of our repair shops in Dallas Texas or Alpharetta Georgia. Here, we have experienced and certified Mercedes Benz mechanics who will fix your car and have it running as good as new in no time. First off, before we start the Mercedes repairs, we will carry out diagnostic tests to ensure that the origin of the issue is indeed the steering gearbox. The fluid levels and condition will be inspected, the power steering pump, the rack and pinion gear set and essentially all components of the system will be inspected for signs of failure as they usually display similar symptoms when there is a malfunction.

    The best repair services for a faulty gearbox is a replacement and that is what we will do. The mechanical components are carefully removed so the gearbox is easily accessible, then the old steering gearbox is simply unbolted from the chassis, removed and replaced with a new and better functioning one. We will also drain and replace the steering fluid as a maintenance service. Manufacturers recommend replacing the gearbox when the car has about 100,000 miles on it. Even if your steering gearbox works fine, it is still advisable that you have it replaced before any failures occur. Additionally, regular servicing and maintenance of your vehicle will go a long way in ensuring that you are not making any unnecessary repairs before a component exceeds its lifespan.