Texas
Is your Jaguar showing a small blinking ABS light on the dashboard? It could be a result of a failed ABS accumulator. The ABS accumulator is part of the braking system of your car and is vital to safe and cautious driving. Here is how you can deal with a failed ABS accumulator and have your Jaguar back in its best condition.
What Is The ABS Accumulator?
The ABS accumulator is one of the important components in your Jaguar’s anti-lock braking system. This component makes it possible to prevent the wheels from locking especially during a hard braking. Hydraulic pressure is stored in the accumulator and can be applied and released very fast during an emergency braking situation. This quick modulation helps the tires to not skid and also improves the braking of the tires, especially when the road is slippery.
Symptoms of a Failed ABS Accumulator
The simplest way to know that your ABS system is failing is by checking the ABS warning light on your Jaguar’s dashboard. Another sign is when the car’s brakes are less effective or when more pressure is needed to slow down or stop the car. You may also observe longer braking distances during emergency brake tests. Some signs are more audible, for instance, when the brake pedal is pressed, certain noises like clicks or hisses are likely to be heard. Also, if there are any signs of leakage around the ABS unit or if you feel the brake pedal goes soft and spongy, then chances are you have a faulty ABS accumulator. It is vital to treat all these symptoms early to ensure the safety and efficiency of your Jaguar.
What To Do If You Think Your ABS Accumulator Is Bad
- Confirm the Problem: The first thing that needs to be done is to make sure that the problem truly lies within the ABS accumulator. If the ABS warning light is on, you can use an OBD-II scanner to pull codes from the computer of your Jaguar. These codes can assist in locating the specific issue within the ABS system. If you are not confident about doing this yourself then you should take your Jaguar to a competent mechanic to carry out the diagnosis.
- Inspect the ABS Accumulator: After you have been able to establish that the ABS accumulator is the problem, you should look at it and see if it has any signs of damage or if it is worn out. Check for any signs of cracks, leakage, or any other signs that can be seen from outside. Any of these symptoms will be a clear indication that the accumulator needs to be replaced.
- Replace the ABS Accumulator: Replacing the ABS accumulator may be a very tedious process and is best done by a mechanic. They are well equipped and qualified to do the replacement in the right manner. The process usually starts with depressurizing the ABS system, it is then followed by replacement of the old accumulator with the new one. After that, your mechanic will then bleed the system to get rid of any air and achieve the correct hydraulic pressure.
- Test the Brakes: When you are done with the replacement of the ABS accumulator, the brakes need to be checked to ensure that they are in good working condition. Go for a road test in your Jaguar and listen to the brakes. The brakes should engage well and there should be no warning signs on the instrument cluster. If you experience any of these problems, revisit the mechanic so the system can be diagnosed again.
Bring Your Jaguar To Us At European Service Center For A Thorough ABS Repair
If you are in search of a reputable shop that offers repair and maintenance services for exquisite European cars, then you should visit us at European Service Center. Since 1979, we have been providing Jaguar drivers with our services in four centers in Georgia and Texas. Our technicians are capable of dealing with all the problems your Jaguar can have. If you have a feeling that the ABS accumulator in your Jaguar is not functioning well, come to us. We guarantee that your Jaguar will be in the best-performing condition it was when you first bought it. Visit us in Plano, Houston, and Dallas, Texas, or at our other branch in Georgia. Make an appointment online now!